Duties & Responsibilities:

• Serve as structural inspector for an asset management program at clients' facility.
• Attend on-site client meetings to coordinate tasks.
• Develop assessment reports and drawings.
• Possess aptitude to act as a positive representative of the company and its core values.
• Have the potential and skill set to effectively complete job tasks.
• Ability to discern between critical and non-critical structural deficiencies.
• Ability to operate mobile equipment, perform confined space entry and be respirator fit.

Job Requirements:

• Bachelor's/Associate's degree in Civil Engineering/Technology with a structural emphasis (not required but preferred).
• 2+ years' experience in the heavy industrial sector (steel mills, refineries, power plants, chemical plants, etc.)
• Structural inspection experience.
• Flexibility in work hours if required.
• Comfortable working at heights.
• Attention to detail and ability to multi-task.
• Proficient computer skills and technical writing.
• Able to interface and perform in a team based environment.

Certifications (preferred or able to obtain):

• Certified weld inspector by the American Welding Society
• American Petroleum Institute API 653 Above Ground Storage Tank Inspector
• Certified Level II to American Society for Nondestructive Testing (ASNT-TCIA) for Magnetic Particle (MT) and Liquid Dye Penetrant (PT)
• Steel Tank Institute SP001 - Above Ground Tank Inspector
• OSHA 10 safety training
• International Code Council (ICC) Structural Steel & Building Special Inspector

Please email your resume to [email protected] for consideration

• Mechanical Engineer (updated 10/10/2022)
• Architect (updated 10/10/2022)
• Electrical Engineer(updated 10/10/2022)

 

MECHANICAL ENGINEER

DUTIES & RESPONSIBILITIES:

• The Mechanical Project Engineer will work under the supervision and support of the Muskegon office HVAC Engineer Project Leader.
• Technical site engineering for commercial, industrial, governmental, and aviation projects.
• Prepare drawing packages for all stages of projects from initial concept, studies, site plan, and client approval, through permitting, bidding, & construction.
• Perform HVAC load calculations, and hydronic and air distribution system sizing calculations.
• Perform equipment selections compatible with the existing building systems and project needs.
• Review client, local, state, and national code requirements to develop site layouts and meet special requirements.
• Review and incorporate client-specific design standards into projects.
• Review equipment vendor documentation to determine installation and integration requirements.
• Develop design documents for equipment layout, ventilation, piping, and plumbing drawings.
• Work closely with designers, engineers, and project managers to coordinate mechanical design with other disciplines, both within the firm and partnering consultants, to meet project deliverables.
• Preparation of project and equipment specification documents.
• Review of RFI’s, contractor submittals, and shop drawings.
• Client interface as part of the team.
• Site visits for field measurements and inspections.
• Preparation of technical reports, project cost estimates, and engineering studies.

Job Requirements:

• Bachelor’s of Science degree in Mechanical Engineering
• 5 years’ experience in HVAC design, plumbing and piping design
• Professional Engineer license preferred
• HVAC design software skills experience (design load tools, piping sizing tools, duct sizing tools)
• Attention to detail and ability to work on multiple projects concurrently
• Able to interface and perform in a team-based environment, and individually
• Proficient in Adobe (or Bluebeam) and Microsoft Office programs

Please email your resume to [email protected] for consideration

 

ARCHITECT

DUTIES & RESPONSIBILITIES:

• Preparation of design and construction documentation for all project types.
• Regular interaction with Sidock support staff in other offices or with outside consultants.
• The ability to work independently as well as part of a team to deliver design and construction documents in a collaborative studio environment.
• Ability to create design presentation both in hand sketch and design software format.
• Field measuring work and preperation of As-Built Documents.
• Some limited travel (using company vehicle, when available).

Job Requirements:

• Bachelor's degree in Architecture
• 7 year's experience in architectural design of industrial and commercial buildings.
• Registered Architect license preferred.
• Proficient in AutoCAD, Revit Architecture, Sketch-up, and in MS Office programs appropriate to the office environment.

Please email your resume to [email protected] for consideration

 

ELECTRICAL ENGINEER

DUTIES & RESPONSIBILITIES:

• Technical site engineering for commercial, industrial, governmental, and aviation projects.
• Prepare drawing packages for all stages of projects from initial concept, studies, site plan, and client approval, through permitting, bidding, & construction.
• Develop drawing packages utilizing AutoCAD, MicroStation V8 & MicroStation V8i for equipment layout, grounding, wiring, and associated details.
• Review client and National Electric Code (NEC) requirements to develop site layouts and meet special requirements.
• Review and incorporate client specific design standards to projects.
• Review equipment vendor documentation to determine installation and integration requirements.
• Work closely with designers, engineers, and project managers to coordinate electrical design with other disciplines, both within the firm and partnering consultants, to meet project deliverables.
• Assist in preparation of project and equipment specification documents.
• Assist in review of RFI’s, contractor submittals, and shop drawings.
• Develop electrical wiring drawings such as one-line diagrams and schematics.
• Develop and maintain CAD standards and templates.
• Client interface as part of the team.
• Site visits for field measurements & inspections.
• Assist in preparation of technical reports, project cost estimates, and engineering studies.
• Assist with writing proposals and RFP’s.

Job Requirements:

• Bachelor of Science Degree in Electrical Engineering or equivalent ABET-accredited degree.
• Completion of the FE exam is a plus.
• Flexibility in work hours to meet project deadlines required.
• Construction experience is a plus.
• Knowledge of Arc-Flash, short-circuit, relay-coordination studies is a plus.
• Attention to detail and ability to multi-task.
• Able to interface and perform in a team-based environment, and individually.
• Proficient in Adobe, Microsoft Office, and AutoCAD programs.
• Knowledge of motor starter and motor control is desired.
• PLC programming and HMI development is a plus.
• Control panel fabrication background is a plus.

Please email your resume to [email protected] for consideration

 

HVAC/Plumbing/Mechanical Designer Sidock Group, Inc. has an immediate opening for an experienced licensed mechanical engineer with proven design abilities, strong leadership skills and a minimum of 5 years experience in HVAC (including load calculations), plumbing and process systems calculations, equipment selection, specifications, system layouts related to buildings, and codes (NFPA, ASHRAE, etc.). Project types include commercial, retail, residential, governmental (municipal, state and federal), military, industrial, healthcare, educational and office buildings. Minimum Education-Bachelor's Degree in Mechanical Engineering required; Master's Degree preferred. License/Certification: Licensed Professional Mechanical Engineer. Minimum Experience-5 years in production of construction documents. Proficient in AutoCAD required; knowledge of LEED and BIM standards, Revit and Trane-Trace a plus. Interested applicants should email resume to [email protected].(updated 1/27/2022)

• Chemical Engineer (updated 1/27/2022)
• Entry Level - Structural Engineer (updated 1/27/2022)
• Structural Engineer - Industrial (updated 1/27/2022)
• Staff Architect (updated 6/27/2022)
• Electrical Senior Project Engineer/Manager (updated 6/30/2022)
• Mechanical Senior Project Engineer (updated 7/7/2022)
• Mechanical Project Engineer (updated 7/7/2022)

 

CHEMICAL ENGINEER

DUTIES & RESPONSIBILITIES:

• Serve as lead or support engineer for the design of industrial projects.
• Able to manage several projects concurrently.
• Able to interface and perform in a team-based environment.
• Attend on-site client meetings to develop project scope.
• Prepare proposal scope and cost estimates.
• Prepare studies and develop design plans for projects.
• Provide technical oversight to less experienced engineers.
• Schedule, plan and execute on-site and project related activities.
• Possess aptitude to act as a positive representative of the company and its core values.
• Possess management potential and skill set to effectively manage projects.

Job Requirements:

• Bachelor’s degree in Chemical Engineering
• 5 to 10 years’ experience in industrial sectors, e.g., steel mills, refineries, power plants, chemical plants, waste treatment facilities, landfills, etc.
• Process design experience
• Experience or familiarity with instrumentation and controls
• Experience with commissioning, start-up, and optimization of systems
• Professional Engineer (PE) registration or ability to obtain
• Project management experience preferred

Please email your resume to [email protected] for consideration

 

ENTRY LEVEL - STRUCTURAL ENGINEER

DUTIES & RESPONSIBILITIES:

• Perform site visits / field inspections
• Develop reports and documents for structural condition assessments of existing facilities.
• Perform engineering analysis and detailed design of concrete, timber, and steel.
• Works with discipline designers to develop design drawings.
• Work independently on smaller projects or assist senior staff on larger projects.
• Perform other duties as needed.

Job Requirements:

• Bachelor's degree in Civil Engineering with a structural emphasis is required.
• 0 to 5 years' experience in the heavy industrial sector (steel mills, refineries, power plants, chemical plants, etc.)
• EIT (FE) accreditation or ability to obtain
• Ability to manage several projects concurrently.
• Able to interface and perform in a team-based environment.
• Microsoft Office, AutoCAD, Navisworks, Risa or similar analytical software.

Please email your resume to [email protected] for consideration

 

STRUCTURAL ENGINEER - INDUSTRIAL

DUTIES & RESPONSIBILITIES:

• Serve as project manager and/or lead engineer on the design of heavy industrial projects.
• Attend on-site client meetings to develop project scope.
• Prepare studies and develop design plans for projects.
• Provide technical oversight to less experienced engineers.
• Prepare proposal scope and cost estimates.
• Possess aptitude to act as a positive representative of the company and its core values.
• Have the management potential and skill set to effectively manage projects immediately or in the future.

Job Requirements:

• Bachelor's degree in Civil Engineering with a structural emphasis is required.
• 5 to 15 years' experience in the heavy industrial sector (steel mills, refineries, power plants, chemical plants, etc.)
• Professional Engineer (PE) registration is required.
• Project management experience preferred.
• Ability to manage several projects concurrently.
• Able to interface and perform in a team-based environment.

Please email your resume to [email protected] for consideration

 

STAFF ARCHITECT

DUTIES & RESPONSIBILITIES:

• Preparation of design and construction documentation for all project types.
• Regular interaction with Sidock support staff in other offices or with outside consultants.
• The ability to work independently as well as part of a team to deliver design and construction documents in a collaborative studio environment.
• Ability to create design presentation both in hand sketch and design software format.
• Field measuring work and preperation of As-Built Documents.
• Some limited travel (using company vehicle, when available).

Job Requirements:

• Bachelor's degree in Architecture
• 5 to 10 years' experience
• Proficient in AutoCAD, Revit Architecture, Sketch-up, and in MS Office programs appropriate to the office environment.

Please email your resume to [email protected] for consideration

 

ELECTRICAL SENIOR PROJECT ENGINEER / ELECTRICAL PROJECT MANAGER

DUTIES & RESPONSIBILITIES:

• Technical site engineering for commercial, industrial, governmental, and aviation projects.
• Prepare drawing packages for all stages of projects from initial concept, studies, site plan, and client approval, through permitting, bidding, & construction.
• Prepare proposals and lead electrical design teams to meet the goals of proposed projects. Responsible for cost management of project budgets.
• Training and development of junior engineering staff and CAD/Designers.
• Develop drawing packages for equipment layout, grounding, wiring, and associated details.
• Review client, local, state, and national code requirements to develop site layouts and meet special requirements. Codes include but are not limited to building codes (IBC), energy codes (ASHRAE 90.1 and IECC), National Electric Code (NFPA 70), Life Safety Code (NFPA 101), Fire Alarm and Signaling Code (NFPA 72).
• Review and incorporate client-specific design standards into projects.
• Review equipment vendor documentation to determine installation and integration requirements.
• Work closely with designers, engineers, and project managers to coordinate electrical design with other disciplines, both within the firm and partnering consultants, to meet project deliverables.
• Preparation of project and equipment specification documents.
• Review of RFI’s, contractor submittals, and shop drawings.
• Develop electrical wiring drawings such as one-line diagrams, plc and motor starter schematics, and control panel wiring diagrams.
• Develop electrical power and conduit plans, lighting plans, and general system plans (low voltage communications, fire alarm, automatic door operators, etc.).
• Ability to write programs for PLCs and HMIs using Allen-Bradley and Siemens systems (preferred)
• Develop and maintain CAD standards and templates.
• Client interface as part of the team.
• Site visits for field measurements and inspections.
• Preparation of technical reports, project cost estimates, and engineering studies.

Job Requirements:

• Bachelor of Science Degree in Electrical Engineering or equivalent ABET-accredited degree.
• Professional Engineering License in Michigan or the ability to become licensed through reciprocity.
• Prior project management experience
• Low and Medium Voltage Power distribution and grounding systems design experience.
• Flexibility in work hours to meet project deadlines required.
• Construction experience is a plus.
• Preparation of Arc Flash, Short Circuit, and Relay Coordination Studies. ETAP experience is a plus.
• Attention to detail and ability to work on multiple projects concurrently.
• Able to interface and perform in a team-based environment, and individually.
• Proficient in Adobe (or Bluebeam) and Microsoft Office programs.
• Knowledge of motor starter and motor control.

Please email your resume to [email protected] for consideration

 

MECHANICAL SENIOR PROJECT ENGINEER

DUTIES & RESPONSIBILITIES:

• Technical site engineering for commercial, industrial, governmental, and aviation projects.
• Prepare drawing packages for all stages of projects from initial concept, studies, site plan, and client approval, through permitting, bidding, & construction.
• Prepare proposals and lead mechanical design teams to meet the goals of proposed projects. Responsible for cost management of project budgets.
• Training and development of junior engineering staff and CAD/Designers.
• Perform HVAC load calculations, and hydronic and air distribution system sizing calculations.
• Perform equipment selections compatible with the existing building systems and project needs.
• Review client, local, state, and national code requirements to develop site layouts and meet special requirements.
• Review and incorporate client-specific design standards into projects.
• Review equipment vendor documentation to determine installation and integration requirements.
• Develop design documents for equipment layout, ventilation, piping, and plumbing drawings.
• Work closely with designers, engineers, and project managers to coordinate mechanical design with other disciplines, both within the firm and partnering consultants, to meet project deliverables.
• Preparation of project and equipment specification documents.
• Review of RFI’s, contractor submittals, and shop drawings.
• Client interface as part of the team.
• Site visits for field measurements and inspections.
• Preparation of technical reports, project cost estimates, and engineering studies.

Job Requirements:

• Bachelor of Science Degree in Mechanical Engineering.
• 10 years job experience.
• Professional Engineering License in Michigan or the ability to become licensed through reciprocity.
• HVAC design software skills experience (design load tools, piping sizing tools, duct sizing tools).
• BMS and HVAC systems associated instrumentation and controls knowledge.
• Attention to detail and ability to work on multiple projects concurrently.
• Able to interface and perform in a team-based environment, and individually.
• Proficient in Adobe (or Bluebeam) and Microsoft Office programs.

Please email your resume to [email protected] for consideration

 

MECHANICAL PROJECT ENGINEER

DUTIES & RESPONSIBILITIES:

• The Mechanical Project Engineer will work under the supervision and support of the Novi office HVAC Engineer Project Leader.
• Technical site engineering for commercial, industrial, governmental, and aviation projects.
• Prepare drawing packages for all stages of projects from initial concept, studies, site plan, and client approval, through permitting, bidding, & construction.
• Perform HVAC load calculations, and hydronic and air distribution system sizing calculations.
• Perform equipment selections compatible with the existing building systems and project needs.
• Review client, local, state, and national code requirements to develop site layouts and meet special requirements.
• Review and incorporate client-specific design standards into projects.
• Review equipment vendor documentation to determine installation and integration requirements.
• Develop design documents for equipment layout, ventilation, piping, and plumbing drawings.
• Work closely with designers, engineers, and project managers to coordinate mechanical design with other disciplines, both within the firm and partnering consultants, to meet project deliverables.
• Preparation of project and equipment specification documents.
• Review of RFI’s, contractor submittals, and shop drawings.
• Client interface as part of the team.
• Site visits for field measurements and inspections.
• Preparation of technical reports, project cost estimates, and engineering studies.

Job Requirements:

• Bachelor of Science Degree in Mechanical Engineering.
• 2 years experience in HVAC design.
• HVAC design software skills experience (design load tools, piping sizing tools, duct sizing tools).
• Attention to detail and ability to work on multiple projects concurrently.
• Able to interface and perform in a team-based environment, and individually.
• Proficient in Adobe (or Bluebeam) and Microsoft Office programs.

Please email your resume to [email protected] for consideration

 

Human Resources Manager

Sidock Group, Inc.

45650 Grand River Ave

Novi, MI 48374

Email: [email protected]

Fax: (248) 349-1429